Alto-Shaam Quickchiller QC-100REMOTE Manual de servicio descargar pdf (Pagina 36)

Q U I CK CH I L LE R • M N -3 6 5 80 ( RE V . 0 ) • I N ST A L LA T I ON / O PE R A TI O N /S ER V I CE M A N UA L • 34.

Error code Action Required

E-10 – Cavity Sensor Shorted

This error message indicates a problem with the interior cavity sensor. The Quickchiller

will not operate in any operational mode. Call service.

E-11 – Cavity Sensor Open

This error message indicates a problem with the interior cavity sensor. The Quickchiller

will not operate in any operational mode. Call service.

P-10 – Probe 1 shorted

This error message indicates a problem with the Probe 1. The Quickchiller will operate

normally in the Time mode but will not operate in the Probe mode. Call service.

P-20 – Probe 2 shorted

This error message indicates a problem with the Probe 2. The Quickchiller will operate

normally in the Time mode but will not operate in the Probe mode. Call service.

P-30 – Probe 3 shorted

This error message indicates a problem with the Probe 3. The Quickchiller will operate

normally in the Time mode but will not operate in the Probe mode. Call service.

C-10 – Coil sensor shorted

This error message indicates a problem with the display identied coil sensor. The

Quickchiller will not operate in any operational mode. Call service.

C-11 – Coil sensor open

This error message indicates a problem with the display identied coil sensor. The

Quickchiller will not operate in any operational mode. Call service.

E-80 – EEPROM error

This error message indicates the control memory is not correctly reading user-set

values. The Quickchiller will remain operational but the user dened settings will be

reloaded to the default values. The control will revert to factory default settings and

will require operator modication each time the unit is used. Call Service.

E-83 – EEPROM not repsonding

EEPROM not responding. Call service.

E-84 – EEPROM User Options Error

User options error. Turn unit on and off to reset. If problem persists call Service

E-53 – Control hardware error

Fatal error. Unit will not opperate. Call service.

E-54 – Control hardware error

Fatal error. Unit will not opperate. Call service.

E-66 – Control processor reset

Processor reset on control board. Call Service.

E-70 – Personality changed

Control Board personality changed during operation. Call Service.

E-77 – Defrost overdue

Unit is more than 1 hr overdue for defrost. Defrost chiller. If error persists call Service.

E-94 – Communication failure

Interface board and control board not communicating. The Quickchiller will not operate

in any mode. Call Service.

TROUBLESHOOTING

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 56 57

Comentarios a estos manuales

Sin comentarios

Alto-Shaam Quickchiller QC-100REMOTE Manual de servicio Pagina 36

Comentarios a estos manuales

Relacionado con productos y manuales para No Alto-Shaam Quickchiller QC-100REMOTE